UK Statutory Instrument SI 2015 United Kingdom

Pyrotechnic Articles (Safety) Regulations 2015

Read it on legislation.gov.uk (opens in a new tab)
Enforced by
OPSS, Trading Standards
Status
Amended (in force with amendments)
Penalty ceiling
Imprisonment 1 of 140 obligations carry up to 2 years imprisonment. 139 have no criminal penalty — flagged in the list below.

Does it bind you?

Business-side roles with duties under this instrument.

Manufacturer64 Conformity Assessment Body22 Operator10 Any Person5 Distributor5

Plus 34 duties on the regulator, Crown ministers and public bodies — folded into the section list below.

Other Acts binding the same actors

If a role above is yours, these are the other instruments that most often bind it.

Manufacturer — also bound by 502 other Acts
Conformity Assessment Body — also bound by 47 other Acts
Operator — also bound by 746 other Acts
Any Person — also bound by 2340 other Acts
Distributor — also bound by 182 other Acts

What it requires

Regulations creating concrete business duties or carrying penalties, grouped as the instrument is structured. Titles link to the source text — blue means you’re leaving for legislation.gov.uk.

Part 1

Preliminary

0 of 6 sections shown
6 other sections in this Part — procedural and definitional
s.001 Citation and commencement
s.002 Interpretation
s.002 Interpretation: designated standard
s.003 Definition of “pyrotechnic article”
s.004 Exception for trade fairs, exhibitions and demonstrations
s.005 Exception for research, development and testing
Part 2

Obligations of economic operators

32 of 39 sections shown
s.006 Categorisation Regulated
  • Categorise pyrotechnic articles by hazard and get approval before saleManufacturer
s.007 Design and manufacture in accordance with essential safety requirements Regulated
  • Ensure pyrotechnic articles meet essential safety requirements before placing on marketManufacturer
s.008 Technical documentation and conformity assessment Regulated
  • Arrange conformity assessment and prepare technical documentation for pyrotechnic articlesManufacturer
s.009 EU declaration of conformity and CE marking Regulated
  • Draw up declaration of conformity and affix UK marking before placing pyrotechnic articles on the marketManufacturer
s.010 Retention of technical documentation and EU declaration of conformity Regulated
  • Keep technical docs and EU declaration of conformity for 10 yearsManufacturer
s.011 Labelling of pyrotechnic articles other than pyrotechnic articles for vehicles Regulated
  • Label pyrotechnic articles correctly before placing on marketManufacturer
s.012 Labelling of pyrotechnic articles for vehicles Regulated
  • Label pyrotechnic articles for vehicles and prepare safety data sheetsManufacturer
s.013 Compliance procedures for series production Regulated
  • Set up compliance procedures for series-produced pyrotechnic articlesManufacturer
s.014 Prohibition on placing on the market pyrotechnic articles which are not in conformity Regulated
  • Do not place pyrotechnic articles on the market unless they meet safety requirementsManufacturer
s.015 Requirements which must be satisfied before an importer places a pyrotechnic article on the market Regulated
  • Check manufacturer compliance before importing pyrotechnic articlesManufacturer
s.016 Prohibition on placing on the market pyrotechnic articles considered not to be in conformity with the essential safety requirements Regulated
  • Importers must not place non-compliant pyrotechnic articles on the marketManufacturer
s.017 Information identifying importer Regulated
  • Label your products with your name and address before sellingManufacturer
s.018 Instructions and safety information Regulated
  • Provide clear English instructions and safety information with pyrotechnic articlesManufacturer
s.019 Retention of technical documentation and EU declaration of conformity Regulated
  • Keep conformity declaration and technical docs for 10 yearsManufacturer
s.020 Traceability Regulated
  • Keep traceability records for 10 years and provide to enforcing authoritiesManufacturer
s.021 Monitoring Regulated
  • Monitor pyrotechnic articles and maintain a compliance registerManufacturer
s.022 Duty to take action in respect of pyrotechnic articles placed on the market which are considered not to be in conformity Regulated
  • Take corrective action for non-compliant pyrotechnic articlesManufacturer
s.023 Provision of information and cooperation Regulated
  • Provide information and cooperate with enforcing authoritiesManufacturer
s.024 Duty to act with due care Regulated
  • Check pyrotechnic articles comply with safety requirements before supplyDistributor
s.025 Requirements which must be satisfied before a distributor makes a pyrotechnic article available on the market Regulated
  • Verify pyrotechnic articles meet UK marking and documentation requirements before saleDistributor
s.026 Prohibition on making available on the market where pyrotechnic article not considered to be in conformity with the essential safety requirements Regulated
  • Do not supply unsafe pyrotechnic articles and report risksDistributor
s.027 Duty to take action in respect of pyrotechnic articles made available on the market which are not in conformity Regulated
  • Take corrective action and notify authorities for non-conforming pyrotechnic articlesDistributor
s.028 Provision of information and cooperation Regulated
  • Provide information to enforcing authorities and cooperate on safety actionsDistributor
s.029 Storage and transport Regulated
  • Ensure safe storage and transport of pyrotechnic articlesManufacturer
s.031 Prohibition on making available to persons younger than the minimum age limit Regulated
  • Do not sell pyrotechnic articles to anyone under the legal age limitOperator
s.032 Prohibition on making available to persons without specialist knowledge Regulated
  • Do not sell high-risk fireworks or pyrotechnics to non-specialistsOperator
s.033 Prohibitions on making available certain category F2 and F3 fireworks Regulated
  • Do not make available prohibited category F2 and F3 fireworks or supply removed from packOperator
s.034 Prohibition on making pyrotechnic articles for vehicles available to members of the general public Regulated
  • Do not sell unincorporated vehicle pyrotechnic articles to the publicOperator
s.035 Supply of UK safety data sheet Regulated
  • Provide UK safety data sheet to professional users of vehicle pyrotechnicsOperator
s.036 Translation of declaration of conformity Regulated
  • Translate or prepare declaration of conformity in the required languageOperator
s.037 Identification of economic operators Regulated
  • Identify supply chain participants to market surveillance authority on requestOperator
s.038 Prohibition on improper use of UK marking Regulated
  • Do not misuse the UK or CE marking on your pyrotechnic articlesOperator
7 other sections in this Part — procedural and definitional
s.030 Cases in which obligations of manufacturers apply to importers and distributors
s.038 Obligations which are met by complying with obligations in the Directive
s.038 Obligations which are met by complying with obligations in the Directive that relate to the registration number
s.038 Obligations which are met by complying with obligations in the Directive that relate to safety data sheet
s.038 Conformity assessment procedure obligation which is met by complying with the Directive
s.038 Further use of UK marking
s.038 Qualifying Northern Ireland Goods
Part 3

Conformity assessment

3 of 5 sections shown
s.040 Conformity assessment procedures Regulated
  • Have your pyrotechnic articles assessed by an approved bodyManufacturer
s.042 UK(NI) indication Regulated
  • Affix UK(NI) indication to pyrotechnic articles sold in Northern IrelandManufacturer
s.042 Register of UK notified bodies Regulated
Other duties (1) — Crown / regulator
  • Secretary of State must maintain a public register of UK notified bodiesCrown / Minister / Government department
2 other sections in this Part — procedural and definitional
s.039 Presumption of conformity
s.042 UK marking
Part 4

Approval of Conformity Assessment Bodies

4 of 9 sections shown
s.047 Restriction, suspension or withdrawal of approval Regulated
Other duties (1) — Crown / regulator
  • Secretary of State must restrict, suspend or withdraw approval of non-compliant approved bodiesCrown / Minister / Government department
s.048 Operational matters in relation to approved bodies Regulated
  • Approved bodies must carry out conformity assessment within scope, follow Schedule 6, and provide manufacturer appealsConformity Assessment Body
s.049 Subsidiaries and contractors Regulated
  • Approved bodies must retain subcontractor records for 10 yearsConformity Assessment Body
s.051 UK national accreditation body Regulated
Other duties (1) — Crown / regulator
  • Notified bodies must ensure subcontractors meet standards and keep recordsStatutory regulator
5 other sections in this Part — procedural and definitional
s.043 Approved bodies
s.044 Approval of conformity assessment bodies
s.045 Presumption of conformity of approved bodies
s.046 Monitoring
s.050 Register of approved bodies
Part 5

Market surveillance and enforcement

3 of 21 sections shown
s.057 Enforcement action in respect of pyrotechnic articles which are not in conformity and which present a risk Regulated
  • Act promptly on enforcement orders for non-compliant pyrotechnicsOperator
s.059 Enforcement action in respect of pyrotechnic articles which are in conformity, but present a risk Regulated
Other duties (1) — Crown / regulator
  • Enforcing authority must require action if compliant pyrotechnic article still presents a riskStatutory regulator
s.060 Enforcement action in respect of formal non-compliance Regulated
Other duties (1) — Crown / regulator
  • Enforcing authorities must first give you a chance to fix formal non-compliance before taking enforcement actionStatutory regulator
18 other sections in this Part — procedural and definitional
s.052 Designation of market surveillance authority
s.053 Enforcement
s.054 Enforcement powers
s.055 Exercise of enforcement powers
s.056 Evaluation of pyrotechnic articles presenting a risk
s.058 EU safeguard procedure
s.061 Restrictive measures
s.062 Offences
s.063 Penalties
s.064 Defence of due diligence
s.065 Liability of persons other than principal offender
s.066 Time limit for prosecution of offences
s.067 Service of documents
s.068 Recovery of expenses of enforcement
s.069 Action by enforcing authority
s.070 Appeals against notices
s.071 Appropriate court for appeals against notices
s.072 Compensation
Part 6

Miscellaneous

0 of 4 sections shown
4 other sections in this Part — procedural and definitional
s.073 Review
s.074 Transitional provisions
s.074 Transitional provision in relation to EU Exit
s.075 Consequential revocations, savings and amendments
Schedules

Schedules

98 of 160 shown
s.sch002 (1) Each pyrotechnic article must attain the performance characteristics specified... Regulated
  • Ensure pyrotechnic articles meet safety and performance standardsAny Person
s.sch002 Fireworks Regulated
  • Assign fireworks to correct category and meet safety requirementsManufacturer
s.sch002 Other pyrotechnic articles Regulated
  • Design pyrotechnic articles to minimise risk and ensure safe ignitionManufacturer
s.sch002a The manufacturer shall lodge an application for a Type examination... Regulated
  • Apply for Type examination for pyrotechnic articlesManufacturer
s.sch002a The approved body shall: For the pyrotechnic article: Regulated
  • Examine technical documentation and verify specimens for type examinationConformity Assessment Body
s.sch002a Examine the technical documentation and supporting evidence to assess the... Regulated
  • Approved body must examine technical documentation for type examinationConformity Assessment Body
s.sch002a Verify that the specimen(s) have been manufactured in conformity with... Regulated
Other duties (1) — Crown / regulator
  • Approved body must verify pyrotechnic specimens match technical documentationStatutory regulator
s.sch002a Carry out appropriate examinations and tests, or have them carried... Regulated
Other duties (1) — Crown / regulator
  • Carry out tests to verify correct application of standardsStatutory regulator
s.sch002a Carry out appropriate examinations and tests, or have them carried... Regulated
Other duties (1) — Crown / regulator
  • Approved body must test alternative manufacturer solutions against essential safety requirementsStatutory regulator
s.sch002a Agree with the manufacturer on a location where the examinations... Regulated
  • Agree with the manufacturer on a location for examinations and testsConformity Assessment Body
s.sch002a The approved body shall draw up an evaluation report that... Regulated
Other duties (1) — Crown / regulator
  • Approved body must keep evaluation report confidential without manufacturer's consentStatutory regulator
s.sch002a Where the type meets the requirements of these Regulations that... Regulated
Other duties (1) — Crown / regulator
  • Approved bodies must issue or refuse Type examination certificates with detailed reasonsStatutory regulator
s.sch002a The approved body shall keep itself apprised of any changes... Regulated
  • Notify approved body of modifications to type-approved pyrotechnic articlesManufacturer
s.sch002a Each approved body shall inform the Secretary of State concerning... Regulated
Other duties (1) — Crown / regulator
  • Approved bodies must report on Type examination certificates to the Secretary of State and peersStatutory regulator
s.sch002a The manufacturer shall keep a copy of the Type examination... Regulated
  • Keep Type examination certificate and technical documentation for 10 yearsManufacturer
s.sch002a Manufacturing The manufacturer shall take all measures necessary so that... Regulated
  • Ensure pyrotechnic manufacturing matches approved type and legal requirementsManufacturer
s.sch002a Product checks An approved body, chosen by the manufacturer, shall... Regulated
  • Appoint an approved body for product checks and affix its identification numberManufacturer
s.sch002a The manufacturer shall affix the UK marking to each individual... Regulated
  • Affix UK marking to each compliant pyrotechnic articleManufacturer
s.sch002a The manufacturer shall draw up a written declaration of conformity... Regulated
  • Write and keep a declaration of conformity for each product modelManufacturer
s.sch002a Manufacturing The manufacturer shall operate an approved quality system for... Regulated
  • Operate an approved quality system for production and testing of pyrotechnic articlesManufacturer
s.sch002a The manufacturer shall lodge an application for assessment of his... Regulated
  • Lodge application for quality system assessmentManufacturer
s.sch002a The quality system shall ensure that the pyrotechnic articles are... Regulated
  • Establish and maintain a documented quality system for pyrotechnic articlesManufacturer
s.sch002a The approved body shall assess the quality system to determine... Regulated
Other duties (1) — Crown / regulator
  • Approved body must assess manufacturer's quality system on siteStatutory regulator
s.sch002a The manufacturer shall undertake to fulfil the obligations arising out... Regulated
  • Maintain the approved quality system so it remains adequate and efficientManufacturer
s.sch002a The manufacturer shall keep the approved body that has approved... Regulated
  • Notify your approved body before changing your quality systemManufacturer
s.sch002a The manufacturer shall, for assessment purposes, allow the approved body... Regulated
  • Allow approved body access to sites and provide quality recordsManufacturer
s.sch002a The approved body shall carry out periodic audits to make... Regulated
Other duties (1) — Crown / regulator
  • Approved body must audit manufacturer's quality system periodicallyStatutory regulator
s.sch002a In addition, the approved body may pay unexpected visits to... Regulated
Other duties (1) — Crown / regulator
  • Approved body can make unannounced inspections of manufacturersStatutory regulator
s.sch002a The manufacturer shall affix the UK marking, and, under the... Regulated
  • Affix UK marking and approved body ID to each compliant pyrotechnic articleManufacturer
s.sch002a The manufacturer shall draw up a written declaration of conformity... Regulated
  • Prepare and keep a Declaration of Conformity for each product model for 10 yearsManufacturer
s.sch002a The manufacturer shall, for a period ending 10 years after... Regulated
  • Keep technical records available for 10 years after placing on marketManufacturer
s.sch002a Each approved body shall inform the Secretary of State of... Regulated
Other duties (1) — Crown / regulator
  • Approved bodies must report quality system approvals to Secretary of State and other approved bodiesStatutory regulator
s.sch002a Manufacturing The manufacturer shall operate an approved quality system for... Regulated
  • Operate an approved quality system for final product inspectionManufacturer
s.sch002a The manufacturer shall lodge an application for assessment of his... Regulated
  • Apply to an approved body to assess your quality systemManufacturer
s.sch002a The quality system shall ensure compliance of the pyrotechnic articles... Regulated
  • Implement and maintain a documented quality system for pyrotechnic articlesManufacturer
s.sch002a The approved body shall assess the quality system to determine... Regulated
Other duties (1) — Crown / regulator
  • Approved body must audit your quality system and premisesStatutory regulator
s.sch002a The manufacturer shall undertake to fulfil the obligations arising out... Regulated
  • Maintain your approved quality system and fulfil its obligationsManufacturer
s.sch002a The manufacturer shall keep the approved body that has approved... Regulated
  • Notify your approved body of any intended changes to the quality systemManufacturer
s.sch002a The manufacturer shall, for assessment purposes, allow the approved body... Regulated
  • Allow approved body access to manufacturing sites and provide quality documentationManufacturer
s.sch002a The approved body shall carry out periodic audits to make... Regulated
Other duties (1) — Crown / regulator
  • Approved body must carry out periodic audits and provide audit reportsStatutory regulator
s.sch002a In addition, the approved body may pay unexpected visits to... Regulated
Other duties (1) — Crown / regulator
  • Approved body may conduct unannounced visits and must provide reportsStatutory regulator
s.sch002a The manufacturer shall affix the UK marking, and, under the... Regulated
  • Affix UK marking and approved body number to each pyrotechnic articleManufacturer
s.sch002a The manufacturer shall draw up a written declaration of conformity... Regulated
  • Draw up and keep a written declaration of conformity for each pyrotechnic product modelManufacturer
s.sch002a The manufacturer shall, for a period ending 10 years after... Regulated
  • Keep technical documentation and approval records for 10 yearsManufacturer
s.sch002a Each approved body shall inform the Secretary of State of... Regulated
Other duties (1) — Crown / regulator
  • Approved bodies must report quality system approvals to the Secretary of StateStatutory regulator
s.sch002a Technical documentation The manufacturer shall establish the technical documentation and... Regulated
  • Create and keep technical documentation for your pyrotechnic articleManufacturer
s.sch002a Manufacturing The manufacturer shall take all measures necessary so that... Regulated
  • Ensure pyrotechnic articles conform to safety requirements during manufacturingManufacturer
s.sch002a Verification An approved body chosen by the manufacturer shall carry... Regulated
  • Use an approved body to verify your pyrotechnic productsManufacturer
s.sch002a The manufacturer shall affix the UK marking and, under the... Regulated
  • Affix UK marking and approved body ID to pyrotechnic articlesManufacturer
s.sch002a The manufacturer shall draw up a written declaration of conformity... Regulated
  • Keep a written Declaration of Conformity for 10 years and share on requestManufacturer
s.sch002a Manufacturing The manufacturer shall operate an approved quality system for... Regulated
  • Operate an approved quality system for pyrotechnic design, manufacture and testingManufacturer
s.sch002a The manufacturer shall lodge an application for assessment of his... Regulated
  • Apply to an approved body for quality system assessmentManufacturer
s.sch002a The quality system shall ensure compliance of the pyrotechnic articles... Regulated
  • Maintain a documented quality system for pyrotechnic articlesManufacturer
s.sch002a The approved body shall assess the quality system to determine... Regulated
Other duties (1) — Crown / regulator
  • Approved body must assess your quality system and inspect your premisesStatutory regulator
s.sch002a The manufacturer shall undertake to fulfil the obligations arising out... Regulated
  • Keep your quality system running and up to dateManufacturer
s.sch002a The manufacturer shall keep the approved body that has approved... Regulated
  • Notify approved body of changes to quality systemManufacturer
s.sch002a The manufacturer shall, for assessment purposes, allow the approved body... Regulated
  • Allow approved body access to sites and records for surveillanceManufacturer
s.sch002a The approved body shall carry out periodic audits to make... Regulated
Other duties (1) — Crown / regulator
  • Approved body must audit manufacturer's quality system periodicallyStatutory regulator
s.sch002a In addition, the approved body may pay unexpected visits to... Regulated
Other duties (1) — Crown / regulator
  • Approved body must provide visit and test reports after unexpected inspectionsStatutory regulator
s.sch002a The manufacturer shall affix the UK marking and, under the... Regulated
  • Affix UK marking and approved body ID number to each compliant pyrotechnic articleManufacturer
s.sch002a The manufacturer shall draw up a written declaration of conformity... Regulated
  • Draw up and keep a declaration of conformity for each pyrotechnic productManufacturer
s.sch002a The manufacturer shall, for a period ending 10 years after... Regulated
  • Keep technical and quality records for 10 years after placing on marketManufacturer
s.sch002a Each approved body shall inform the Secretary of State of... Regulated
Other duties (1) — Crown / regulator
  • Approved bodies must share quality system approvals with the Secretary of State and other bodiesCrown / Minister / Government department
s.sch003 Labelling Regulated
  • Include required labelling on pyrotechnic articlesManufacturer
s.sch003 Additional instructions and safety information Regulated
  • Label fireworks with required safety warnings and distancesAny Person
s.sch005 A conformity assessment body must have the means necessary to... Regulated
  • Conformity assessment bodies must have the means and equipment to perform assessmentsConformity Assessment Body
s.sch005 The personnel responsible for carrying out conformity assessment activities must... Regulated
  • Ensure personnel conducting conformity assessments are qualified and competentAny Person
s.sch005 A conformity assessment body must be able to demonstrate the... Regulated
  • Demonstrate impartiality of top management and assessment personnelConformity Assessment Body
s.sch005 The remuneration of the top level management and the personnel... Regulated
  • Do not link pay of conformity assessment staff to number or outcome of assessmentsConformity Assessment Body
s.sch005 A conformity assessment body must have, and must satisfy the... Regulated
  • Have adequate civil liability insurance and demonstrate it to the Secretary of StateConformity Assessment Body
s.sch005 A conformity assessment body must ensure that its personnel observe... Regulated
  • Conformity assessment bodies must keep your information confidentialConformity Assessment Body
s.sch005 A conformity assessment body must participate in, or ensure that... Regulated
  • Stay informed of standardisation and apply administrative decisionsConformity Assessment Body
s.sch005 A conformity assessment body must be a third party body... Regulated
  • Ensure independence as a conformity assessment bodyConformity Assessment Body
s.sch005 (1) A conformity assessment body, its top level management and... Regulated
  • Conformity assessment bodies must not be involved in pyrotechnic supply chainConformity Assessment Body
s.sch005 A conformity assessment body, its top level management and the... Regulated
  • Conformity assessment bodies must not be involved in pyrotechnics design, manufacture, or salesConformity Assessment Body
s.sch005 A conformity assessment body, its top level management and the... Regulated
  • Conformity assessment bodies must avoid conflicts of interestConformity Assessment Body
s.sch005 A conformity assessment body must ensure that the activities of... Regulated
  • Ensure subsidiaries and subcontractors uphold assessment integrityConformity Assessment Body
s.sch005 A conformity assessment body and its personnel must carry out... Regulated
  • Carry out conformity assessments with integrity and competenceConformity Assessment Body
s.sch005 A conformity assessment body must ensure that it, either on... Regulated
  • Ensure capability to carry out all approved conformity assessment activitiesConformity Assessment Body
s.sch005 A conformity assessment body must have at its disposal— Regulated
  • Conformity assessment bodies must have competent staff and documented proceduresConformity Assessment Body
s.sch006 A notified body An approved body must carry out conformity... Regulated
Other duties (1) — Crown / regulator
  • Approved bodies must carry out conformity assessments for pyrotechnic articlesStatutory regulator
s.sch006 Where this paragraph applies, the notified body the approved body... Regulated
Other duties (1) — Crown / regulator
  • Notified body must give notice and hearing before refusing or withdrawing certificationStatutory regulator
s.sch006 A notified body An approved body must inform the Secretary... Regulated
Other duties (1) — Crown / regulator
  • Notified/approved bodies must report certificate decisions and regulator requests to the Secretary of StateStatutory regulator
s.sch006 A notified body An approved body must make provision in... Regulated
Other duties (1) — Crown / regulator
  • Notified/approved bodies must include appeal rights in client contractsStatutory regulator
s.sch006 An approved body must provide other bodies approved under these... Regulated
  • Share conformity assessment results with other approved bodiesConformity Assessment Body
s.sch006 An approved body must participate in the work of any... Regulated
  • Approved bodies must join and attend coordination groupsConformity Assessment Body
s.sch006 A notified body An approved body must carry out conformity... Regulated
Other duties (1) — Crown / regulator
  • Approved bodies must assess your product reasonably, not overburden youStatutory regulator
s.sch006 A notified body An approved body must perform its activities... Regulated
Other duties (1) — Crown / regulator
  • Notified and approved bodies must tailor assessments to your businessStatutory regulator
s.sch006 A notified body An approved body must respect the degree... Regulated
Other duties (1) — Crown / regulator
  • Notified or approved bodies must apply appropriate rigour when assessing pyrotechnic articlesStatutory regulator
s.sch006 An approved body carrying out a conformity assessment must— Regulated
  • Assign registration numbers to assessed pyrotechnic articles and keep a register for 10 yearsConformity Assessment Body
s.sch006 (1) Pyrotechnic articles must be labelled with a UK registration... Regulated
  • Label pyrotechnic articles with a UK registration numberAny Person
s.sch006 From IP completion day— (a) an entry made in the... Regulated
Other duties (1) — Crown / regulator
  • Your business must register pyrotechnic article approvals onlineStatutory regulator
s.sch006 (1) Entries made in the register from IP completion day... Regulated
  • Ensure register entries contain required information for pyrotechnic articlesManufacturer
s.sch006 Where an approved body finds that essential safety requirements or... Regulated
Other duties (1) — Crown / regulator
  • Approved bodies must refuse certification for non‑compliant pyrotechnic articlesStatutory regulator
s.sch006 Where, in the course of the monitoring of conformity following... Regulated
Other duties (1) — Crown / regulator
  • Notified/approved body must act on non-conforming pyrotechnic articlesStatutory regulator
s.sch006 Where the notified body the approved body has required a... Regulated
Other duties (1) — Crown / regulator
  • Approved body must restrict, suspend or withdraw certificate if manufacturer fails corrective measuresStatutory regulator
s.sch008 Modifications to the 1974 Act Imprisonment
  • Fail to comply with a prohibition noticeAny Person
s.sch009 Recall notice Regulated
  • Comply with a recall notice for unsafe pyrotechnic articlesOperator
62 other schedules
s.sch001 Fireworks
s.sch001 Category F2 fireworks are fireworks which present a low hazard...
s.sch001 Category F3 fireworks are fireworks which present a medium hazard,...
s.sch001 Category F4 fireworks are fireworks which present a high hazard,...
s.sch001 Theatrical pyrotechnic articles
s.sch001 Category T2 theatrical pyrotechnic articles are theatrical pyrotechnic articles which...
s.sch001 Other pyrotechnic articles
s.sch001 Category P2 other pyrotechnic articles are pyrotechnic articles, other than...
s.sch002 Ignition devices
s.sch002a Type examination is the part of a conformity assessment procedure...
s.sch002a Type examination shall be carried out as an assessment of...
s.sch002a Conformity to type based on internal production control plus supervised...
s.sch002a UK marking and declaration of conformity
s.sch002a Conformity to type based on quality assurance of the production...
s.sch002a Quality system
s.sch002a Surveillance under the responsibility of the approved body
s.sch002a The purpose of surveillance is to make sure that the...
s.sch002a UK marking and declaration of conformity
s.sch002a Conformity to type based on product quality assurance is that...
s.sch002a Quality system
s.sch002a Surveillance under the responsibility of the approved body
s.sch002a The purpose of surveillance is to make sure that the...
s.sch002a UK marking and declaration of conformity
s.sch002a Conformity based on unit verification is the conformity assessment procedure...
s.sch002a UK marking and declaration of conformity
s.sch002a Conformity based on full quality assurance is the conformity assessment...
s.sch002a Quality system
s.sch002a Surveillance under the responsibility of the approved body
s.sch002a The purpose of surveillance is to make sure that the...
s.sch002a UK marking and declaration of conformity
s.sch003 The labelling of sparklers must also display the words “Warning:...
s.sch003 The labelling of a theatrical pyrotechnic article must also display...
s.sch003 The labelling of a category P1 other pyrotechnic article or...
s.sch003 In paragraph 3, “sparkler” means a rigid wire article partially...
s.sch004 Person with specialist knowledge: category F4 fireworks
s.sch004 Person with specialist knowledge: category T2 theatrical pyrotechnic articles
s.sch004 Person with specialist knowledge: category P2 other pyrotechnic articles
s.sch004 Person with specialist knowledge: officers of enforcing authorities
s.sch004 Interpretation
s.sch005 A conformity assessment body must be established under the national...
s.sch005 Paragraph 15 does not prevent the personnel from providing information...
s.sch006 Paragraph 11 applies where a notified body an approved body...
s.sch007 Enforcement powers under the 1987 Act
s.sch007 Modifications to the 1987 Act
s.sch008 Enforcement powers under the 1974 Act
s.sch009 Compliance notice
s.sch009 Withdrawal notice
s.sch009 Interpretation
s.sch010 The Fireworks Regulations 2004 are amended as set out below....
s.sch010 In regulation 3 (interpretation)— (a) for the definition of “adult...
s.sch010 In regulation 5 (prohibition of possession of category 4 fireworks),...
s.sch010 In regulation 6(1)(c) (exceptions to regulations 4 and 5), for...
s.sch010 In regulation 9 (licensing of fireworks suppliers)—
s.sch010 In regulation 10 (information about fireworks)— (a) in paragraph (1),...
s.sch011 The Explosives (Fireworks) Regulations (Northern Ireland) 2002 are amended as...
s.sch011 In regulation 2 (interpretation)— (a) after “In these Regulations—”, insert—...
s.sch011 In regulation 4(1) (prohibition on the possession, purchase, sale, acquisition,...
s.sch011 In regulation 7 (production of licence)— (a) in paragraph (2),...
s.sch011 In regulation 11(1)(a) (display of notice and certificate)—
s.sch011 In regulation 12 (transactions in fireworks), for “the fireworks in...
s.sch011 In Schedule 1 (fireworks exempt from the provisions of regulation...
s.sch011 Omit Schedule 2.
4 other provisions
s.para.185 (1) UK registration number: (2) Product, batch or serial number:...
s.para.186 Signed for and on behalf of:
s.para.187 [place and date of issue]:
s.para.188 [name, function] [signature]:

Duty extraction and severity labels are Guvnor’s analysis of the instrument, not the instrument itself. Always verify against the linked source text.