uri:annex/iii/division/4
- Use corrected actual mass in vehicle simulation tool
Retained EU Law
2017
United Kingdom
Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance)
At a glance
What's here
40 compliance obligations
Who this Act binds
Plus 1 non-business duty on Crown ministers, regulators, local authorities or tribunals — shown collapsed under each section below.
What this Act requires
Sections that create concrete duties on businesses or carry penalties. Procedural and definitional sections are folded into the “Browse other sections” expander at the bottom of each group. Click any section title to read the source text on legislation.gov.uk.
uri:annex/iii/division/5
- Classify axle drive type correctly for vehicle configuration
uri:annex/v/appendix/4/division/1/division/1
- Check production engines match certified CO2 and fuel specs
uri:annex/v/appendix/6/division/1/division/1.7
- Use durable, non-removable markings on engines
uri:annex/v/division/3/division/3.1/division/3.1.3
- Prevent crankcase gas emissions or measure them for open systems
uri:annex/v/division/4/division/4.3/division/4.3.2
- Record engine motoring curve for CO2-parent engine of each engine family
uri:annex/v/division/6/division/6.1/division/6.1.14
- Use declared engine rated power as input data and round per ASTM standard
uri:annex/vi/appendix/6/division/1/division/1/division/1.1
- Notify Approval Authority of driveline parameter interactions and unlisted performance devices
uri:annex/vi/appendix/6/division/1/division/2
- Provide additional test data when regulator demands highest-torque-loss testing
uri:annex/vi/appendix/7/division/1/division/1/division/1.7
- Fit durable, tamper-proof identification markings on transmissions and driveline components
uri:annex/vi/division/3
- Measure transmission torque losses for heavy-duty vehicle certification
uri:annex/vi/division/5/division/5.1/division/5.1.1
- Ensure test retarder matches production specs and provide proof on request
uri:annex/vi/division/7
- Test your transmissions annually for CO₂ and fuel consumption compliance
uri:annex/vi/division/8/division/8.1
- Ensure transmission efficiency meets conformity limits during testing
uri:annex/vii/appendix/4/division/1/division/1
- Apply for approval of axle families from the approval authority
uri:annex/vii/appendix/4/division/1/division/2
- Notify the approval authority of parameter interactions and non-listed performance parameters
uri:annex/vii/appendix/5/division/1/division/1/division/1.6
- Ensure axle markings are durable, legible and non-removable
uri:annex/vii/division/4
- Test axle torque loss using prescribed procedures and conditions
uri:annex/vii/division/5
- Test axles annually for CO₂ emissions conformity
uri:annex/viii/appendix/5
- Group vehicles into approved air drag families with supporting data
uri:annex/viii/appendix/8
- Affix certification marks to type-approved heavy-duty vehicle cabins
uri:annex/viii/division/3/division/3.1/division/3.1.9
- Measure and record altitude profiles for air drag testing
uri:annex/xa/division/3
- Select and test heavy-duty vehicles for CO2 emissions verification within 10 months
uri:annex/xa/division/5/division/5.3
- Investigate and report gear position deviations over 5% of test duration
uri:annex/x/division/3/division/3.1
- Certify tyre manufacturer plant to ISO/TS 16949
uri:annex/x/division/3/division/3.3
- Test tyres for CO2 emissions and fuel consumption as required
uri:annex/x/division/3/division/3.4
- Ensure tyres are traceable to their rolling-resistance certificate
Electronic tools
Other duties (1) — Crown / regulator
- Use Commission-approved simulation, pre-processing and hashing tools for CO2 and fuel consumption testing Statutory regulator
Subsequent changes to the processes set up for the purposes of determining CO2 emissions and fuel consumption of vehicles
- Notify the approval authority about changes to CO2 and fuel consumption determination processes
Obligation to determine and declare CO2 emissions and fuel consumption of new vehicles
- Determine and declare CO2 emissions and fuel consumption for new heavy-duty vehicles
Modifications, updates and malfunction of the electronic tools
- Use updated simulation tool and notify of malfunction within deadlines
Accessibility of the simulation tool inputs and output information
- Keep CO₂ and fuel consumption records for 20 years and share with authorities on request
Components, separate technical units and systems relevant for the purposes of determining CO2 emissions and fuel consumption
- Provide certified or standard CO2 data for heavy-duty vehicle components
Family concept regarding components, separate technical units and systems using certified values
- Provide evidence that your parent component fully represents its family
Extension to include a new component, separate technical unit or system into a component family, separate technical unit family or system family
- Apply for approval to add new parts to a certified family
Subsequent changes relevant for the certification of CO2 emissions and fuel consumption related properties of components, separate technical units and systems
- Notify approval authority of design changes affecting CO2 certifications
Responsibilities of the vehicle manufacturer, the approval authority and the Commission with regard to the conformity of simulation tool operation
- Perform annual verification testing and report on CO2 emissions and fuel consumption
Remedial measures for the conformity of simulation tool operation
- Submit a remedial measures plan when your CO2 simulation tool processes are non-compliant
Responsibilities of the manufacturer and approval authority with regards to conformity of CO2 emissions and fuel consumption related properties of components, separate technical units and systems
- Ensure certified CO2 emissions and fuel consumption properties remain correct when fitted
Remedial measures for the conformity of CO2 emissions and fuel consumption related properties of components, separate technical units and systems
- Submit and execute a remedial plan for non-conforming CO2/fuel components
Browse 44 other sections — procedural / definitional / commencement
uri:annex/ii/division/1/division/1.1
uri:annex/iii/division/3
uri:annex/iii/division/7
uri:annex/iii/division/8/division/8.3
uri:annex/iii/division/8/division/8.4
uri:annex/iv/part/i/division/1/division/1.1
uri:annex/v/appendix/1.2/division/1/division/2
uri:annex/v/appendix/3/division/1/division/1/division/1.8
uri:annex/v/appendix/4/division/1/division/2
uri:annex/v/appendix/4/division/1/division/3
uri:annex/v/appendix/4/division/1/division/4
uri:annex/v/appendix/4/division/1/division/5
uri:annex/v/division/6/division/6.1/division/6.1.1
uri:annex/v/division/6/division/6.1/division/6.1.10
uri:annex/v/division/6/division/6.1/division/6.1.12
uri:annex/v/division/6/division/6.1/division/6.1.3
uri:annex/v/division/6/division/6.1/division/6.1.4
uri:annex/vi/appendix/6/division/1/division/9
uri:annex/vi/appendix/7/division/1/division/1/division/1.10
uri:annex/vi/division/4/division/4.1/division/4.1.7/division/4.1.7.2
uri:annex/vi/division/4/division/4.2/division/4.2.7/division/4.1.7.2
uri:annex/vi/division/5/division/5.1/division/5.1.2
uri:annex/vi/division/5/division/5.1/division/5.1.6/division/5.1.6.2/division/3
uri:annex/vi/division/6/division/6.1/division/6.1.2
uri:annex/vii/division/3/division/3.1
uri:annex/viii/appendix/6/division/1/division/5
uri:annex/viii/division/3/division/3.3
uri:annex/viii/division/3/division/3.4/division/3.4.3
uri:annex/x/division/4/division/4.1
uri:annex/x/division/4/division/4.3
Subject matter
Scope
Definitions
Vehicle groups
Application for a licence to operate the simulation tool with a view to determining CO2 emissions and fuel consumption of new vehicles
Administrative provisions for the granting of the licence
Standard values
Certified values
Application for a certification of the CO2 emissions and fuel consumption related properties of components, separate technical units or systems
Administrative provisions for the certification of CO2 emissions and fuel consumption related properties of components, separate technical units and systems
Transitional provisions
Amendment to Directive 2007/46/EC
Amendment to Regulation (EU) No 582/2011
Entry into force
Explore more
Browse legislation
Find other UK business legislation with related guidance.