uri:annex/i/division/1/division/1.1/division/1.1.2
- Declare fuels and prove engine meets emission rules for each fuel type
Retained EU Law
2011
United Kingdom
Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council (Text with EEA relevance)
At a glance
What's here
27 compliance obligations
What this Act requires
Sections that create concrete duties on businesses or carry penalties. Procedural and definitional sections are folded into the “Browse other sections” expander at the bottom of each group. Click any section title to read the source text on legislation.gov.uk.
uri:annex/i/division/7/division/7.2/division/7.2.2
- Do not adjust engines after submission to authorities
uri:annex/i/division/7/division/7.2/division/7.2.3.1
- Perform running-in on test engines without making adjustments
uri:annex/i/division/7/division/7.4
- Regularly check ECU data availability and conformity for each engine type
uri:annex/ii/appendix/1
- Use certified PEMS equipment and follow test procedures for on-road emissions
uri:annex/ii/division/2/division/2.3
- Demonstrate that your test vehicle and driving patterns are representative for the engine family
uri:annex/ii/division/2/division/2.4
- Report conformity testing schedule and sampling plan at initial type-approval
uri:annex/ii/division/9
- Submit and manage a remedial action plan for non-conforming engines
uri:annex/iv/division/2/division/2.4
- Confirm lambda value accuracy within 24 months of type-approval
uri:annex/vi/appendix/1/division/1/division/2
- Enable PEMS testing of heavy-duty vehicles by independent parties
uri:annex/viii/division/5
- Provide CO₂ and fuel consumption data for type-approval extension of heavy vehicles
uri:annex/x/appendix/5/division/1/division/2/division/2.3
- Organise and conduct in-use emissions surveys in cooperation with approval authority
uri:annex/x/appendix/5/division/1/division/6
- Provide in-use performance reports on OBD engine families to the approval authority
uri:annex/x/division/2
- Monitor diesel particulate filter performance against OBD limits
uri:annex/xi/appendix/3
- Test durability of replacement pollution control devices as per regulatory procedure
uri:annex/xi/division/4/division/4.2
- Ensure replacement pollution control devices are durable and provide mechanical shock test evidence
uri:annex/xii/division/2/division/2.3
- Perform in-service conformity testing on heavy-duty engine families
Requirements for type-approval
- Demonstrate compliance with emission tests and pollution limits for GB type-approval
On-board diagnostics
- Fit on-board diagnostics (OBD) systems to heavy-duty vehicles and ensure they meet Euro VI requirements
Application for GB type-approval of an engine system or engine family as a separate technical unit with regard to emissions ...
- Apply for GB type-approval with full emissions documentation
Application for GB type-approval of a vehicle with an approved engine system with regard to emissions and access to vehicle repair and maintenance information
- Apply for GB type-approval of a vehicle with an approved engine system
Application for GB type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information
- Apply for GB type-approval for heavy duty vehicle emissions
In-service conformity
- Ensure in-service conformity of heavy-duty vehicle emissions
Remedial measures
- Submit and implement remedial measures plan for non-compliant engines
Requirements to limit off-cycle emissions
- Limit tailpipe emissions throughout vehicle life and under all normal conditions
Pollution control devices
- Ensure replacement pollution control devices are type-approved and original devices are marked
Application for GB type-approval of a type of replacement pollution control device as a separate technical unit
- Apply for GB type-approval of replacement pollution control devices
Browse 54 other sections — procedural / definitional / commencement
uri:annex/i/division/1/division/1.1/division/1.1.1
uri:annex/i/division/1/division/1.1/division/1.1.3
uri:annex/i/division/1/division/1.1/division/1.1.4
uri:annex/i/division/1/division/1.1/division/1.1.6
uri:annex/i/division/1/division/1.3
uri:annex/i/division/3/division/3.2
uri:annex/i/division/3./division/3.2./division/3.2.3.
uri:annex/i/division/3/division/3.3/division/3.3.1
uri:annex/i/division/4/division/4.3/division/4.3.3
uri:annex/i/division/5/division/5.2/division/5.2.1
uri:annex/i/division/5/division/5.3
uri:annex/i/division/6/division/6.4
uri:annex/i/division/7/division/7.2/division/7.2.3.2
uri:annex/i/division/7/division/7.2/division/7.2.3.3
uri:annex/i/division/8/division/8.3.1
uri:annex/ii/division/3
uri:annex/ii/division/5/division/5.1/division/5.1.1
uri:annex/ii/division/7
uri:annex/v/division/3
uri:annex/vi/division/3
uri:annex/vi/division/8
uri:annex/x/appendix/5/division/1/division/2/division/2.4/division/2.4.1
uri:annex/x/appendix/5/division/1/division/4/division/4.1
uri:annex/x/appendix/5/division/1/division/5/division/5.2
uri:annex/x/division/5
uri:annex/xi/division/2/division/2.1
uri:annex/xiii/division/3
uri:annex/xviii/division/1
uri:annex/xviii/division/7/division/7.1
Contact details of the manufacturer’s representative referred to by this...
Website addresses referred to by this Certificate:
Directive 2007/46/EC is amended as follows:
Annex I is amended as follows: the following point 3.2.1.11...
Annex I to Regulation (EC) No 595/2009 is replaced by...
ANNEX I Euro VI Emission Limits The admissible level of...
Subject matter
Definitions
Access to vehicle OBD and vehicle repair and maintenance information
Multi-stage type-approval
Customer adaptations
Small volume manufacturers
Carry-over systems
Fees for access to vehicle repair and maintenance information
Compliance with the obligations regarding access to vehicle OBD and vehicle repair and maintenance information
Forum on Access to Vehicle Information
Administrative provisions for GB type-approval of an engine system or engine family as a separate technical unit with regard to emissions and access to repair and maintenance information
Administrative provisions for GB type-approval of a vehicle with an approved engine system with regard to emissions and access to vehicle repair and maintenance information
Administrative provisions for GB type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information
Conformity of production
Administrative provisions for GB type-approval of replacement pollution control device as separate technical unit
Transitional provisions for certain type-approvals and certificates of conformity
Amendments to Regulation (EC) No 595/2009
Amendments to Directive 2007/46/EC
Entry into force
Explore more
Browse legislation
Find other UK business legislation with related guidance.