Check whether the duties apply to your letting
The duties fall on the landlord of residential premises let under a lease or a licence. Under a lease, the landlord is the person entitled to the reversion on the lease. In Scotland, it is the person entitled to the landlord's interest under the lease. In England and Wales, under a licence the landlord is the licensor. Where the licensor is a tenant of the premises, the landlord is the person entitled to the reversion.
The duties apply to premises, or any part of premises, occupied for residential purposes in return for money or money's worth, whether the occupation is exclusive or not. A check is not required for a family member staying rent-free, though servicing as the manufacturer advises is strongly recommended.
For these duties, a lease is a lease for a term of less than 7 years, a tenancy for a periodic term of any length, or a statutory tenancy arising from either. A longer fixed lease falls outside the duties. These rules apply when working out the term:
- a lease the lessor can end before 7 years from the start of the term counts as a lease for less than 7 years
- a fixed lease with an option to renew does not count as a lease for less than 7 years, where the original term and the renewal term together amount to 7 years or more
- that renewal rule does not apply to a periodic tenancy
- a mortgage term is not a lease
- in England and Wales, any part of the term before the grant is left out
Landlords include private landlords, housing associations, local authorities and hostels. They also include landlords of rooms in private households, bed and breakfasts and hotels. Owners of rented holiday accommodation such as chalets, cottages, flats, caravans and narrow boats are landlords too. A householder who takes rent from a lodger is a landlord who must arrange an annual check. Where you own a shop and rent out the flat above, the duties apply to the flat. Where a student stays for short periods and you are paid for things such as food, you take on the duties of a landlord.
Who carries the duties
| Situation | Who carries the duties |
|---|---|
| A management contract makes the letting agent responsible | The same duties apply to the agent as to a landlord. |
| The management contract is unclear | The duties remain with the landlord. |
| A tenant sub-lets the property | The original landlord stays responsible and cannot transfer that responsibility. Where the property is wholly sub-let, the contract must clearly allocate responsibility for the checks. |
| A tenant lets rooms to others in return for rent | The tenant does not acquire these duties. They stay with the tenant's landlord. |
| A tenant agrees to maintain or check the appliances | What the tenant does or agrees is disregarded in deciding whether the landlord has met the duties, except as to access. The exception is a fitting in a part of the premises occupied for non-residential purposes, such as a shop or pub. |
| A full repairing and insuring lease | It cannot transfer the duties to the tenant, apart from appliances in a non-residential part. |
| Shared ownership with a lease of longer than 7 years | The housing company has no landlord duties. |
| Shared ownership with a lease of under 7 years | The housing company is a landlord, and the contract should say who does the duties. |
| A lease of longer than 7 years that is for life | The landlord is not responsible for gas safety checks and maintenance. Where an implied tenancy arrangement remains, such as accommodation provided as part of a job like a vicar or a publican, HSE recommends carrying out the landlord's duties. |
- Check interval
- No more than 12 months apart
- Who may check
- A Gas Safe registered engineer
- Copy to existing tenants
- Within 28 days of the check
- Copy to new tenants
- Before they occupy
- Keep the record
- Until two further checks of that appliance or flue
Know what the duties cover
Every landlord must ensure that each relevant gas fitting, and each flue serving one, is maintained in a safe condition. The aim is to prevent the risk of injury to anyone lawfully occupying the premises. The safe-condition duty is separate from, and wider than, the annual check.
A relevant gas fitting is:
- any gas appliance installed in the premises, other than one the tenant is entitled to remove
- any installation pipework installed in the premises
- any appliance or pipework that directly or indirectly serves the premises, if it is in a part of premises in which the landlord has an estate or interest
- any such appliance or pipework that is owned or controlled by the landlord, such as a communal boiler
A relevant gas fitting does not include a gas appliance or installation pipework used exclusively in a part of the premises occupied for non-residential purposes. An example is a gas fire used only in a pub bar. A boiler in a non-domestic part that also serves the residential accommodation is covered. For an appliance the tenant owns and the landlord did not provide, the landlord is responsible for parts of the associated installation and pipework but not for the appliance.
A portable gas appliance counts, including a portable or mobile space heater supplied from a cylinder, such as an LPG heater. The duties for LPG appliances are the same as for natural gas. Where a communal appliance such as a boiler serves several dwellings, the landlord must ensure it is maintained by a Gas Safe registered engineer. It must also be checked as part of the annual check. That may involve co-ordinating with the building owner.
The annual check covers appliances and flues. Installation pipework is not part of the annual check, but it must still be maintained in a safe condition. Asking the engineer to test it for soundness and examine it is recommended. Where there is no gas appliance in the property but pipework or a flue passes through it, no annual check is needed. The pipework or flue must still be maintained in a safe condition. Between checks, appliances should be serviced in line with the manufacturer's instructions, or annually where there are none, unless the engineer advises otherwise.
Most of the gas safety rules do not apply to mines, quarries, factories, agricultural premises, temporary construction installations, gas-testing premises, sewage treatment premises or gas compression installations. They do apply to any part of such premises used for domestic or residential purposes or as sleeping accommodation. A touring caravan is outside the rules unless it is hired out in the course of a business. A vessel not needing a load line certificate is also outside them. The exception is a vessel hired out in the course of a business, made available to the public in a business, or used primarily for domestic or residential purposes.
Work out when each check is due
Each appliance and flue must be checked for safety within 12 months of being installed. After that, checks must be at intervals of not more than 12 months since it was last checked. It makes no difference whether the earlier check was made under the gas safety regulations or not.
For a new lease, each appliance and flue must also have been checked within the 12 months before the lease begins, or within 12 months after it was installed, whichever is later. A record is valid for 12 months from the check, so a new tenancy that starts within that period can use the existing record. No new annual safety check is needed just because the tenants change. A copy of the record goes to the new tenants. HSE advises that appropriate checks are carried out before a new tenancy begins, and that any unsafe equipment is rectified or removed.
Before re-letting, make sure all appliances and flues are safe and have an up-to-date record. HSE recommends another check by a Gas Safe registered engineer before giving new tenants access, where you suspect an appliance could have been tampered with or there is a possibility of vandalism while the property is empty. An appliance a previous tenant left behind should be removed or checked by a Gas Safe registered engineer, and ownership made clear.
The deadline date is the last day of the 12-month period within which the check is required. A check completed within the 2 months ending with the deadline date is treated as made on the deadline date, so the annual cycle does not move. HSE says that to rely on this, the landlord must be able to show the checks met the timescales. The record must be kept until two further checks have been carried out.
A landlord may instead have an appliance or flue checked within the 2 months beginning with the deadline date, rather than in the 12 months ending with it. This may be done only once for each appliance or flue. It may be done only to align its next deadline with the deadline for another appliance or flue in the same premises.
Use a Gas Safe registered engineer
The landlord must ensure that any work on a relevant gas fitting, and any check of an appliance or flue, is done by a person approved by the Health and Safety Executive (HSE). An employee of an approved person also qualifies. That means a Gas Safe registered engineer. A record from an engineer who is not on the Gas Safe Register is not valid. A landlord who used to be a gas fitter cannot do the check unless they are Gas Safe registered.
Check that the engineer is competent for the specific area of gas work. That is shown on the back of the Gas Safe registration card, or on the Gas Safe Register website.
The check must include, but is not limited to, an examination of:
- the effectiveness of any flue
- the supply of combustion air
- operating pressure or heat input (or both, where necessary), or combustion performance where examining these is not reasonably practicable
- safe operation
Make and keep the record
The landlord must ensure a record of each check is made. The record must include:
- the date of the check
- the address of the premises
- the name and address of the landlord or, where appropriate, the landlord's agent
- a description and the location of each appliance or flue checked
- any safety defect identified
- any remedial action taken
- confirmation that the check examined the matters the regulations require
- the engineer's name and signature
- the registration number with which the engineer, or their employer, is registered with the body approved by HSE
The landlord must ensure the record is kept until there have been two further checks of that appliance or flue. For an appliance or flue removed from the premises, it must be kept for 2 years from the date of the last check. The record can be stored electronically, as long as the electronic copy can be reproduced in hard copy, is secure from loss and interference, and uniquely identifies the engineer who did the check.
The record, or a copy, must be made available for inspection on request and on reasonable notice. This applies to any person in lawful occupation of the premises who may be affected by the appliance.
There is no standard form. The record is called the landlord gas safety record, previously the gas safety certificate or CP12. A landlord may design their own form for the engineer to fill in. The landlord does not have to sign it, but the landlord's name and address, or the letting agent's, must be on it.
The record should be issued on completion of the checks. It should not be held back because defects are found or until remedial work is done, and follow-up action can be added to it. The landlord must take prompt action to correct any defect on the record. An appliance suspected to be dangerous should not be used until it is remedied. HSE says that if a heating appliance has been disconnected, the landlord must provide the tenant with emergency heating.
Give each tenant the record
The landlord must ensure each existing tenant is given a copy of the record within 28 days of the date of the check. The 28 days run from the check, not from the date the engineer issues the record. A new tenant must be given a copy of the last record for each appliance or flue before they occupy the premises.
Where a tenant's right to occupy is for a period not exceeding 28 days, a copy of the record may instead be prominently displayed within the premises.
Where there is no relevant gas appliance in any room occupied or to be occupied by the tenant, the landlord may display a copy of the record instead of giving the tenant a copy. The display must be in a prominent position in the premises, from the time a copy would have been due to the tenant. It must carry a statement endorsed on it. The statement must say the tenant is entitled to have their own copy on request to the landlord, at an address specified in the statement. On a request, the landlord must give a copy as soon as practicable. HSE says landlords must tell tenants where the notice is, and how to obtain an individual copy, at the beginning of a new tenancy.
A copy of the record given to a new tenant need not carry the engineer's signature. The copy must then state that a signed copy is available for inspection on request to the landlord at a specified address. On a request, the landlord must make a signed copy available for inspection as soon as practicable.
A landlord may give tenants their copy electronically if the tenant is happy to receive it that way and can access it. The landlord must give a paper copy on request.
If a tenant will not give access
No one is guilty of an offence for breaking the duty if they can show they took all reasonable steps to prevent the breach. The burden is on the landlord to show it. A landlord must not use force to enter. The recommended steps are to:
- leave a notice that an attempt was made, with contact details
- write to the tenant explaining that the check is a legal requirement and offering the tenant the chance to arrange their own appointment
- keep a record of all correspondence
Repeated attempts to complete the check are expected, and a court decides what was reasonable. The contract with the tenant should allow the landlord access for maintenance and safety checks.
Know the penalty for breaking the duty
Breaking the duty is an offence under section 33(1)(c) of the Health and Safety at Work etc. Act 1974. The offence can be tried summarily or on indictment. On indictment, the penalty is imprisonment for up to 2 years, a fine, or both. HSE enforces the duty.
-
Confirm the letting is covered
Check that the premises are occupied for residential purposes in return for money or money's worth under a lease or a licence, and which appliances, pipework and flues you are responsible for.
-
Book a Gas Safe registered engineer
Check the engineer is competent for the specific area of gas work, shown on the back of their Gas Safe registration card or on the Gas Safe Register website. Book the check before the deadline date.
-
Get the record on completion
Ask for the record when the checks are complete, and act promptly on any defect it shows.
-
Give each tenant a copy
Give each existing tenant a copy within 28 days of the date of the check, and each new tenant a copy before they occupy.
-
Keep the record
Keep it until there have been two further checks of the appliance or flue. For an appliance or flue removed from the premises, keep it for 2 years from the date of the last check. Work out the next deadline date for each one.
Legal basis
Primary legislation and key regulations