UK Statutory Instrument SI 2000/388 United Kingdom

The Weighing Equipment (Automatic Gravimetric Filling Instruments) Regulations 2000

Read it on legislation.gov.uk (opens in a new tab)
Status
In Force
Penalty ceiling
Regulated

Does it bind you?

Business-side roles with duties under this instrument.

Manufacturer1

Other Acts binding the same actors

If a role above is yours, these are the other instruments that most often bind it.

Manufacturer — also bound by 502 other Acts

What it requires

Regulations creating concrete business duties or carrying penalties, grouped as the instrument is structured. Titles link to the source text — blue means you’re leaving for legislation.gov.uk.

sch. 4 Descriptive markings Regulated
  • Ensure filling instruments bear required descriptive markingsManufacturer
16 other provisions — procedural and definitional
s.001 Citation, commencement, consequential disapplication and amendment
s.002 Interpretation
s.003 Application
s.004 Transitional exclusion
s.005 General duties for use for trade
s.006 Requirements to be satisfied for passing as fit for use for trade
s.006 Where the indication of the exact quantity of material a...
s.007 Supplementary requirements
s.008 Filling Instruments imported from an EEA State
s.009 Passing as fit for use for trade
s.010 Stamping
s.011 Manner of obliteration of stamps
s.012 Obliteration of stamps
s.013 An inspector shall obliterate the stamp on any filling instrument...
s.014 An inspector may obliterate the stamp on any filling instrument...
s.015 (1) For the purposes of these Regulations, the obliteration of...
Schedules

Schedules

0 of 21 shown
21 other schedules
s.sch001 Cleaning and testing
s.sch001 Feeding device (Extract from Clause 3.5 of Part 1 of
s.sch001 Load receptor (Clause 3.6 of Part 1 of OIML R 61)
s.sch001 Equilibrium mechanism (Clause 3.8 of Part 1 of OIML R 61)
s.sch001 Installation (Extract from Clause 5.3.1 of Part 1 of OIML R 61)
s.sch002 Static temperatures (Clause 2.5.1 of Part 1 of OIML R 61)
s.sch002 Tilting (Clause 2.5.3 of Part 1 of OIML R 61)
s.sch002 Suitability for use (Clause 3.1 of Part 1 of OIML R 61)
s.sch002 Zero-setting and tare devices (Extract from Clause 3.7 of Part 1 of OIML R 61)
s.sch002 Specified purpose or manner of use
s.sch002 Minimum or maximum capacity
s.sch004 Additional descriptive marking
s.sch004 Descriptive markings
s.sch004 Markings shown in full
s.sch004 Markings shown in code
s.sch004 Presentation of descriptive markings
s.sch004 Verification marks
s.sch004 Position
s.sch004 Mounting
s.sch005 Maximum permissible deviation of each fill (Clause 2.2.2 of Part 1 of OIML R 61)
s.sch005 Maximum permissible preset value error (Clause 2.3 of Part 1 of OIML R 61)

Duty extraction and severity labels are Guvnor’s analysis of the instrument, not the instrument itself. Always verify against the linked source text.