Commission Regulation (EU) 2015/1185 of 24 April 2015 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for solid fuel local space heaters (Text with EEA relevance)

s.annex i para.1

For the purpose of Annexes II to V the following...

s.annex i para.2

‘seasonal space heating energy efficiency’ (ηs) means the ratio between...

s.annex iv para.1

The verification tolerances defined in this Annex relate only to...

s.annex iv para.2

When verifying the compliance of a product model with the...

s.annex iv para.3

The Great Britain authorities shall verify one single unit of...

s.annex iv para.4

The Great Britain authorities shall use the measurement and calculation...

s.annex iv para.5

The Great Britain authorities shall only apply the verification tolerances...

s.annex iv para.6

Table 4 Verification tolerances Parameters Verification tolerances Seasonal space-heating energy...

s.annex v para.1

At the time of entry into force of this Regulation,...

s.annex v para.2

Specific benchmarks for seasonal space heating energy efficiency of solid...

s.annex v para.3

The benchmarks specified in points 1 to 5 do not...

s.annex v para.4

For closed fronted solid fuel local space heaters using solid...

s.annex v para.5

For closed fronted solid fuel local space heaters using compressed...

s.annex v para.6

For cookers an example of a good combination is an...

s.art001

Subject matter and scope

s.art002

Definitions

s.art003

Ecodesign requirements and timetable

s.art004

Conformity assessment

s.art005

Verification procedure for market surveillance purposes

s.art006

Indicative benchmarks

s.art007

Review

s.art008

Transitional provisions

s.art009

Entry into force