- Status
- In Force
- Penalty ceiling
- Regulated
Does it bind you?
Business-side roles with duties under this instrument.
Any Person1
Other Acts binding the same actors
If a role above is yours, these are the other instruments that most often bind it.
Any Person — also bound by 2340 other Acts
Human Medicines Regulations 2012
184 duties
Merchant Shipping Act 1995
144 duties
Insolvency (England and Wales) Rules 2016
104 duties
Communications Act 2003
92 duties
Road Traffic Act 1988
92 duties
What it requires
Regulations creating concrete business duties or carrying penalties, grouped as the instrument is structured. Titles link to the source text — blue means you’re leaving for legislation.gov.uk.
sch. 3
Specified purpose or manner of use
Regulated
- Only use catchweighing instruments within their specified capacities, temperature range, and purposeAny Person
18 other provisions — procedural and definitional
sch. 4
Additional Descriptive Marking
s.001
Citation and commencement
s.002
Interpretation
s.003
Application and Effect
s.004
Transitional exclusion
s.005
General duties for use for trade
s.006
Requirements to be satisfied for passing as fit for use for trade
s.007
Supplementary indications
s.008
Supplementary requirements
s.009
Automatic catchweighing instruments imported from an EEA State
s.010
Passing as fit for use for trade
s.011
Stamping
s.012
Obliteration of stamps (method)
s.013
Obliteration of stamps (failure to comply)
s.014
Obliteration of stamps on instruments which are unfit for use for trade
s.015
Power to obliterate stamps on instruments which are unfit for use for trade for a particular purpose
s.016
Obliteration of all stamps
s.017
Amendment
Schedules
Schedules
0 of 48 shown48 other schedules
s.sch001
An instrument which is made in accordance with an approved...
s.sch001
An instrument which is made in accordance with an approved...
s.sch002
Installation (Principle from Clause 5.3.1 of OIML R51)
s.sch002
The installation of an automatic catchweighing instrument shall be so...
s.sch002
Cleaning and testing
s.sch002
Dynamic setting (Extract from Clause 3.2.3 of OIML R51)
s.sch002
Instruments with dynamic setting shall have a facility for any...
s.sch003
The minimum capacity shall not be less than: for class...
s.sch003
Temperature (Principle from Clause 2.9.1 of OIML R51)
s.sch003
Instruments shall comply with the appropriate metrological and technical requirements...
s.sch003
Where an automatic catchweighing instrument is marked with a temperature...
s.sch003
Tilting (Principle from Clause 2.9.3 of OIML R51)
s.sch003
Instruments which are not intended for installation in a fixed...
s.sch003
Where an automatic catchweighing instrument is fitted with a level...
s.sch003
Specified purpose or manner of use
s.sch003
Instruments of Class Y(b) shall only be used for weighing...
s.sch003
Definition of waste
s.sch003
Zero-setting device (Extract from Clause 3.3.1 of OIML R51)
s.sch003
An automatic zero-setting device shall operate: • only when the...
s.sch003
A non-automatic zero-setting device shall not be operable during automatic...
s.sch003
A semi-automatic zero-setting device shall function only when the stability...
s.sch003
Zero-tracking device (Extract from Clause 3.3.2 of OIML R51)
s.sch003
A zero-tracking device shall operate only when: • the indication...
s.sch003
Tare device (Extract from Clause 3.3.3 of OIML R51)
s.sch003
A semi-automatic or automatic tare device shall operate only when...
s.sch003
A non-automatic or semi-automatic tare device shall not be operable...
s.sch003
Suitability for use (Extract from Clause 3.1 of OIML R51)...
s.sch003
An instrument shall be designed to suit the method of...
s.sch003
Minimum capacity (Extract from Clause 3.5 of OIML R51)
s.sch003
Printing a weighing result below minimum capacity shall not be...
s.sch003
Maximum capacity (Extract from Clause 3.4.3 of OIML R51)
s.sch003
There shall be no indication above Max + 9 e....
s.sch003
Rate of operation
s.sch003
Maximum and minimum capacities (Extract from Clause 2.4 of OIML...
s.sch003
Maximum capacity (Max) and minimum capacity (Min) shall be specified...
s.sch004
Instruments shall bear the following markings.
s.sch004
• name or identification mark of the manufacturer • name...
s.sch004
• pattern approval sign • indication of the class of...
s.sch004
Depending upon the particular use of the instrument, supplementary markings...
s.sch004
Descriptive markings shall be indelible and of a size, shape...
s.sch004
Schedule 4 para.3n6
s.sch004
Instruments shall have a place for the application of verification...
s.sch004
Instruments required to bear verification marks shall have a verification...
s.sch004
Additional Descriptive Marking
s.sch005
Maximum permissible errors for class Y(y) instruments
s.sch005
The maximum permissible error for any load equal to or...
s.sch005
(Principle from Clause 2.5.2 of OIML R51)
s.sch005
The maximum permissible error for any load equal to or...
Duty extraction and severity labels are Guvnor’s analysis of the instrument, not the instrument itself. Always verify against the linked source text.