- Status
- In Force
What it defines
Regulations creating concrete business duties or carrying penalties, grouped as the instrument is structured. Titles link to the source text — blue means you’re leaving for legislation.gov.uk.
40 other provisions — procedural and definitional
s.001
Citation and commencement
s.002
Interpretation
s.003
Application of Regulations and prescription of automatic weighing machines
s.004
Purposes of use for trade
s.005
Provisions applicable to filling machines and discontinuous totalisers
s.006
Construction of automatic weighing machines with removable parts and metrological characteristics of such machines with interchangeable or reversible parts
s.007
Strength of constituent parts
s.008
Zero-setting device
s.009
Visual indication of value of measurement
s.010
Approved patterns
s.011
Marking of automatic weighing machines
s.012
Marking of units of measurement
s.013
Provision of sealing devices
s.014
Provision of tare and level indicating devices
s.015
Construction of filling machine with manually controlled discharge facility
s.016
Purported weighing capacity
s.017
Restriction on fitting of rider or weight indicating device
s.018
Marking of filling machines
s.019
Filling machine to be positioned to facilitate cleaning and testing and restriction on use of a machine fitted with level indicating devices
s.020
Restriction on use of a filling machine marked with a temperature range
s.021
Manner of erection and use of a filling machine fitted with a weight printing device
s.022
Pre-testing requirements
s.023
Requirements relating to testing
s.024
Discontinuous totalisers provided with a visual weight indication
s.025
Marking of discontinuous totalisers
s.026
Manner of erection of discontinuous totalisers and availability of non-automatic weighing machine
s.027
Manner of use for trade
s.028
Accessability of information and controls to operator
s.029
Manner of erection and use of a discontinuous totaliser fitted with a weight printing device
s.030
Restriction on use of a discontinuous totaliser marked with a temperature range
s.031
Pre-testing requirements
s.032
Requirements relating to testing
s.033
Prescribed limits of error
s.034
Passing as fit for use for trade
s.035
Stamping
s.036
Obliteration of stamps
s.037
Inspectors' powers and duties regarding obliteration of stamps
s.038
Mandatory obliteration of stamps by an inspector
s.039
Discretionary obliteration of stamps by an inspector
s.040
Consequence of the obliteration of a stamp
Schedules
Schedules
0 of 13 shown13 other schedules
s.sch001
(1) Subject to sub-paragraph (2), in testing any filling machine,...
s.sch001
Before commencing material testing of the filling machine, the inspector...
s.sch001
(1) Every filling machine shall be subjected to the following...
s.sch001
(1) Subject to sub-paragraph (3), if in the course of...
s.sch002
Discontinuous totalisers to which the requirements of Regulations 9 and...
s.sch002
Discontinuous totalisers which embody the facilities in Regulation 9 but...
s.sch002
Discontinuous totalisers to which Regulation 9 and 24 are applicable...
s.sch002
(1) Subject to sub-paragraph (2), in testing any discontinuous totaliser,...
s.sch002
Before commencing material testing of the discontinuous totaliser, the inspector...
s.sch002
(1) With the load receptor of the discontinuous totaliser empty,...
s.sch002
Where a discontinuous totaliser is constructed with a weighing unit...
s.sch002
(1) The inspector shall use the subdivided scale provided in...
s.sch002
(1) After allowing the machine to weigh and discharge suitable...
Duty extraction and severity labels are Guvnor’s analysis of the instrument, not the instrument itself. Always verify against the linked source text.